SENT Protocol 12-Channel I/O Card

Transmit signals in real-time using the SENT protocol

Get this card

What is the SENT Protocol I/O Card?

Concurrent Real-Time’s SENT protocol I/O card is ideal for use in high-performance hardware-in-the-loop (HIL) simulation and test applications. The PCIe card supports the Single Edge Nibble Transmission (SENT) protocol as specified by SAE J2716. The card provides 12 SENT input (decoder) and output channels. The number of data nibbles per message can be configured between 1 and 6. The basic SENT protocol tick length, which defaults to  3 microseconds, can be varied on the fly. The card supports both legacy and current CRC-4 calculations as well as optional pause pulse. Additionally, the implementation supports both short and enhanced-format messages with 4-bit and 8-bit IDs.

The SENT protocol I/O card is fully supported by Concurrent’s RedHawk Linux operating system on iHawk SIMulation Workbench platforms. Multiple cards can be installed in a single system. A Molex LFH-60 connector is mounted on each card for connection to external devices.

FPGA Card

Specifications

Features

SENT Card

12-channel TTL SENT output

12-channel TTL SENT input (decoder)

66 MHz base frequency

Fast Channel, 1 to 6 nibbles

Short Format – data communicated in a 16-bit sequence

Enhanced Format – data communicated in an 18-bit sequence

  • 12-bit data and 8-bit message
  • 16-bit data and 4-bit message
General

FPGA-based SENT protocol I/O board

Supports multiple cards per system

External connectors: Molex LFH-60

Packaging

DimensionsFHHL PCI Express

Power Requirements

Power RequirementsApproximately 5 Watts

Ordering Information

12-channel SENT protocol I/O CardCP-SENT-12
SIMulation Workbench LicenseICS-SWB-1280
I/O Interface Assembly with 6-foot CableCX-LFH60
I/O Interface Assembly with 6-foot Cable with DIN MountingCX-LFH60-DIN

Get the SENT Protocol 12-Channel I/O Card

Talk to our experts and incorporate the SENT Protocol 12-Channel I/O Card in your application today.